Contact us/
Industry news
Current position:主页 > News > Industry news >

What are the characteristics of belt conveyer

Article source:http://www.zhengchiyw.com Release time:2016-02-23 17:11 Browse times:

Adjust measures to local conditions to create a more valuable things reflect his own ability, is again good a boat, there is no water, it can only when the tub. Maybe someone says this metaphor is too exaggeration, but true. Belt conveyor also belong to this category

 

Big dip Angle belt conveyor is widely used in building industry, metallurgical industry, food processing, etc., what determines the big dip Angle belt conveyor in all walks of life demand? This goes to big dip Angle belt conveyor unique technical advantages:

 

(1) the big dip Angle belt conveyor transmission Angle is large, the largest up to 90 °, is an ideal equipment to transport of large dip Angle and vertical ascending. So you can save area, save equipment investment and construction cost, obtain good comprehensive economic benefit. For example, a user wants to the coal up to 20 m high bunker roof, such as using guard machine with 45 ° obliquity conveying, the captain only 28.3 m (20 m) level of the pilot; Using vertical conveying rim machine, so, horizontal captain can control within 6 m.

 

(2) simple structure. As mentioned earlier, the main components are common with general belt conveyor, bring convenience to use and maintenance.

 

(3) reliable operation. Often appear no buried scraper conveyor, disconnection of chain and chain, and the bucket elevator, off the bucket of a spin occur frequently. Its reliability and usually almost equal belt conveyor.

 

(4) smooth operation, low noise.

 

Because there is no charge, (5) when the digging resistance and run-time friction materials for external and internal friction resistance, so the energy consumption is small. In southern shandong chemical fertilizer plant, for example, the use of two sets of hoisting height of 19.28 m, the conveying capacity is 25 t/h of the vertical guard crushed coal conveyor, its each installed power only 4 kw, and replaced by their four sets of the total installed power of the original buried scraper conveyer for 44 kw.

 

(6) vertical penal machine also can be set in the nose and tail of arbitrary length horizontal conveying section, easy to interface with other equipment

To share:
上一篇:Difference between net belt conveyor application
下一篇:没有了
Copyright all rights reserved Shanghai Shanghai ICP for 15019677-1 for chi automation equipment co., LTD. Technical support Xiao li fly knife